Replacement for ACER BT.T5003.001 Battery, ACER TravelMate 4000 Series Battery, ACER Laptop Battery | ||
Click to enlarge | Shipping Rates | |
Please ensure the product(s) that you are going to buy fits the brand, model and part number of your device. | ||
Battery Technology | ||
* | Product ID: | NAC013 |
* | Battery Type: | Li-ion |
* | Battery Capacity: | 4400mAh |
* | Battery Volt: | 14.8V |
* | Battery Color: | Black |
* | Battery Weight: | 552.83g |
* | Dimension: | 211.40x70.60x22.30mm |
* | This replacement laptop battery can replace the following part number: | |
BT.T5003.001, BT.T5005.001, BT.T5003.002, BT.T5007.002, 4UR18650F-1-QC192, BT.T5007.001, LC.BTP03.003, BT.T5005.002, BTP-AS1681 See More ... | ||
* | This replacement laptop battery is compatible with the following models: | |
TravelMate 4000 Series, TravelMate 2300 Series, Aspire 1680 Series, TravelMate 2303LC, Aspire 1641LM, Aspire 3002WLCi, Extensa 2304WLM, TravelMate 2310 Series, TravelMate 4011LCi, TravelMate 4104, TravelMate 4001WLMi, Aspire 1682WLC, Aspire 3503NWLMi, Extensa 4102WLMi, TravelMate 2313NLCi, TravelMate 4022WLMi, TravelMate 4504, TravelMate 4601WLMi, Aspire 1692WCLi, Aspire 5002WLCi See More ... | ||
* | 1 year warranty |
Information | ||||||||||||||||||||||||||
Please Note
ACER BT.T5003.001 Battery Articles & Tips A new ACER BT.T5003.001 battery comes in a discharged condition and must be charged before use (refer to the devices manual for charging instructions). Upon initial use (or after a prolonged storage period) the digital camcorder ACER BT.T5003.001 may require three to four charge/discharge cycles before achieving maximum capacity. New ACER BT.T5003.001 battery needs to be fully charged and discharged (cycled) a few times before it can condition to full capacity. Rechargeable batteries undergo self-discharging when left unused. Always store a Camcorder Battery pack in a fully charged staged for storage.When charging the ACER BT.T5003.001 battery for the first time the device may indicate that charging is complete after just 10 or 15 minutes. This is a normal phenomenon with rechargeable batteries. Remove the camcorder batteries from the device, reinsert it and repeat the charging procedure. It is important to condition (fully discharge and then fully charge) the ACER BT.T5003.001 battery every two to three weeks. Failure to do so may significantly shorten the battery's life (this does not apply to Li-ion batteries, which do not require conditioning). To discharge, simply run the device under the battery's power until it shuts down or until you get a low battery warning. Then recharge the battery as instructed in the user's manual. If the battery will not be in use for a month or longer, it is recommended that ACER BT.T5003.001 be removed from the device and stored in a cool, dry, clean place. Invest in a good charger for your camcorder. Ni-MH batteries should not be charged in a NiCad charger, unless the charger is specifically made for both chemistries. There are cheap chargers and there are expensive chargers. Make sure the charger you get has good reviews and is well made. Chargers with micro-controller chips are usually the best choice of your digital camcorder. Be sure to store your Camcorder Battery properly. Do not leave your batteries in a hot car, or in humid conditions. The best storage conditions are a cool, dry place. The refrigerator is fine if you stick in a packet of silica gel with your ACER BT.T5003.001 in a sealed bag to keep them dry. It is a good idea to charge your NiCad or Ni-MH batteries fully before use if they have been in storage.
|
No comments:
Post a Comment